You probably want to know the cost of resurfacing your pool if you’re considering it due to cracks, stains, or general wear and tear. You have multiple options for resurfacing your pool, which can be overwhelming when figuring out the total price.
Despite the durability of in-ground concrete pools, their inner surfaces may chip, crack, fade, or discolor over time. To extend the life of a structurally sound pool, it is possible to repair surface imperfections by refinishing or resurfacing them.
Most pool owners need to resurface their inground pools regularly. Additionally, it can extend the pool’s lifespan and improve your swimming experience. However, the cost can be quite high.
On average, $ 15,000 to $ 20,000 should be a reasonable amount to resurface the pool in any state in the United States. However, there are many factors related to the cost of resurfacing. Costs can range from $ 1,000 to $ 100,000. You may have to spend $ 5,000 to $ 10,000 to resurface the underground pool.
This cost depends on many factors, including interior finishes and tile types, pool size, and pool area. Inground swimming pools come in several different types, so you can see how much resurfacing will cost.
All details are important, both for upfront costs and long-term maintenance. In particular, what kind of maintenance will be required for concrete pools in the next 20 years? How much time, money, and effort can you spend on the life of the pool?
So, let’s discuss How much does it cost to resurface a pool?
Resurface cost depends on multiple factors:
Countryside Area
Different regions of the country have different prices due to the climate, the availability of business and supplies, and the overall cost of living.
Conditions of the swimming pool
If the plaster area is hollow, it may be necessary to scrape it before finishing the existing plaster. Otherwise, the old, loose plaster may peel off, and the new finish may peel off.
You may be able to do this yourself, but for concrete pools, it is advisable to hire a specialist. Concrete is complicated. The fault tolerance is so small that you don’t want to risk more significant problems unless you have experience with pool plaster.
Type of waterline tile
Even if the tiles aren’t the general interior, you need tiles along the waterline to prevent dirt. The tile we’re talking about is called waterline tile.
Your tile options will affect your price. (The same goes for the size of the pool and the width of the line.)
Again, the most common materials for tiles are:
- Glass
- Porcelain/ceramic
- Stones
Square Footage
Spend more money for every square foot you resurface. It’s just more material.
Note that this applies to both A) pool body and B) tiled perimeter finishes. This cost can be added quickly, especially for specially customized shapes.
Type of Pool Surface
Pool surfaces are available in various materials, looks, and prices. Plaster and vinyl are the two most common materials used in mid-priced pools, but materials such as custom tiles are usually reserved for luxury pools and resorts. Each material requires special care and maintenance to keep it in good condition.
Fiberglass
These pools are equipped with a non-perforated gel coating, giving the surface a clean and shiny look. Fiberglass does a great job of resisting algae buildup, and you can also find it in different colors to match your favorite design and style.
With fiberglass pools, you can keep them going for decades without having to refurbish them if you purchase a high-quality pool and take care of them regularly.
However, it is important to remember that not all fiberglass pools are created equal. Even when using high-quality fiberglass pools, neglect can cause damage, and pools must be refurbished first.
Resurface Cost of Fiberglass Pool
| The cost of resurfacing a fiberglass pool is $6,500. Apart from plaster, all gunite treatments can also be applied to fiberglass. Since the primary type does not affect the equipment price, the finished products are the same. |
Plaster Pool
From an economic standpoint, plaster tends to be the best option when the budget is tight. The putty is made from water, Portland cement, and silica or sand. This material is often called shotcrete. It can be affordable, but it’s also very durable and should last around 7-10 years for the average homeowner before it needs attention.
Plaster is the way to go if you want a classic and inexpensive pool area. The plaster consists of white concrete, white sand or marble chips, and water. It can be used in any shape or size of the pool and can be painted in different colors.
Resurface Cost of Plaster Pool
| You can expect to pay as little as $ 10,000 to refurbish a swimming pool. This is probably what you would pay for a 15×35 foot pool, so expect to pay more for a larger pool. |
Tiles Pool
When it comes to aesthetics, tiles make your pool look good. There are swimming pool tiles made of everything from ceramic and porcelain to glass and stone. Tiled pools are fully customizable based on color, design, and pattern preferences but are more expensive than many other surface options.
| Tile finishes last longer and is often more attractive, but this comes at a price. Some tile cleaning services can cost up to $ 30 per foot. However, on average, you can expect to pay as little as $ 25,000 to renovate your tile pool. |
Note: Alternatively, you can use ecoFINISH and epoxy paint on the pool.
Aggregate Pool
This material is a mixture of gypsum and stone, tiles, granite, glass beads, or pieces of quartz. Pool chemicals tolerate the finish well and can choose from various colors. The polished aggregate has a smooth, glossy surface, while the exposed aggregate, such as glass beads and pebbles, is coarse and designed to add decorative components to the pool.
Resurface Cost of Aggregate
| Pool finishing materials cost about $ 5 per square foot, not including labor, water, supplies, and other costs to complete the job. To give you a rough estimate, you can expect to pay at least $ 13,000 for a pool with a half-sized pool. |
Inground Pool
As for the in-ground pool, the repair cost can reach $5,000, assuming the pool has not been seriously damaged. But sometimes, you can start the recovery process from scratch due to severe damage. If so, the price can range from $30,000 to $50,000.
Above Ground Pool
Compared to inground pools, above-ground pools are cheaper to restore. And the recovery process is quite simple too. You can get everything you need without any problems, and repairs and restorations, require little time and effort.
Therefore, labor and ownership costs will be high. Pool replacement can cost up to $ 2,000.
Vinyl Pool
Vinyl pools have a vinyl coating that can tear due to wear. If it is necessary to replace the entire Coating, the cost of the new Coating will depend on its condition and durability. Repairing a specific area or completely replacing the vinyl siding are the only two options available if you want to restore this type of pool.
Resurface Cost of Vinyl Pool
| The cost to replace vinyl siding, including labor, is usually between $1,000 and $3,500. For the material alone, patches will cost between $ 100 and $ 500. The price of the liner is determined by its thickness and longevity. |
It is responsible for the construction and finishing of the pool. This model can only be modified by repair or replacement. This is one of the best fiberglass pools for resurfacing.
ecoFINISH Coating
If the entire surface of the fiberglass pool needs to be refurbished, products such as ecoFINISH may be used.
ecoFINISH is a long-lasting, chemical-resistant thermoplastic coating that can be applied to concrete and fiberglass pools. The pool’s renovation by ecoFINISH will be completed in a few days, and there is no waiting time. You can immediately start filling your pool with water.
It can also be purchased in a variety of colors and custom-made to match your existing pool.
Resurface Cost of ecoFINISH
| The cost of using a product like ecoFINISH depends on the pool size and the contractor. For small to medium pools, you can expect to pay as much as $10,000 to $15,000. |
Epoxy paint is a water-soluble pool paint that works on various pool types, including fiberglass and concrete. The advantage is that it can create a safe and beautiful spot in your pool on a budget. The problem is that it can only be used on the surface, which means that if you have another color or type of surface, it won’t stick. Also, it can take up to two weeks for the pool to heal and be usable.
Frequently asked questions (FAQs)
Q1- Which material is suitable for pool surfaces?
Regarding budget, vinyl flooring is the best choice for a swimming pool. However, it is prone to rips and tears. Tiles are a beautiful high-end option, but fiberglass and plaster are two great mid-level options that offer durability and various color options.
Q2- When and why resurface a swimming pool?
The duration of the surface of your pool depends on the type of material installed. The plaster should be between five and fifteen years old. A quartz surface can last 10 years or more. Finishing a glossy pool can last anywhere from five to fifteen years. The longevity of your pool surface will largely depend on how well it is maintained and the quality of the initial installation.
There are some signs that it is time to restart the pool. If you notice it bending, wrinkling, or cracking, it will be time to repair or replace it as soon as possible. The surface of your pool may be starting to feel hard on your hand, which is also a sign that the material is starting to fail. Scratches or rust spots on peeling paint or fiberglass are other red flags. Finally, structural cracks signify that it is time to restore the pool before the damage gets out of hand and is too expensive to repair.
Q3- Why does the color of the pool surface change?
Even if you care for the pool, it can damage the surface. A common reason for this is improper water chemistry.
Sometimes there may be a chemical imbalance in the water when the pool is first filled. The pH of the pool should be 7.2-7.6. This is the ideal range for keeping the surface healthy.
Rain can also cause damage, which can upset the pH balance in the pool and create an environment that can damage the surface. Be sure to test the water as many issues can occur in this situation.
It can also be fertilizer or other rust that enters your pool and causes dirt. Everything from trees, leaves, and plants can shift the pH balance and make the pool vulnerable to damage.
Here you can read about: How To Fix Your Cloudy Pool
Conclusion
In the summer, pools call. Nothing is better than cooling off in the pool during the summer heat and getting pampered. In conclusion, estimating How Much Does It Cost to Resurface a Pool is simple. Once cracks appear in your pool, resurfacing is necessary to maintain it.
An entirely new pool cost can be much higher than what seems like a lot of money. Think about the benefits you will get from your pool and the fun you and your family will have when you share it. Keeping your pool in good condition is not only important for keeping you interested and enjoying your pool, but it’s also healthy.
We hope you found this helpful article in any case. Make an informed decision about your pool resurfacing project by researching, getting a few quotes from local companies, and then comparing them. Have fun!