Regular swimming in the pool can result in dirt, sand, and algae growing in the water. As a result, removing them from the pool’s bottom is difficult.
There may be no vacuum available. Cleaning a pool by hand is difficult. Despite this, you want to know “How to get Sand out of Pool without Vacuum.”
Filters are a great option for cleaning pools without vacuums. To clean your pool, you can also use shocks. The algae growth can be prevented by using algae-killing agents. However, it is better to have the pool regularly serviced than to wait for a sudden time.
You can pick up a surprising amount of sand from your pool or shed using a few tools.
If you’re looking for a unique way to clean the sand of your pool, take a quick look at this list of alternative cleaning methods to avoid all deposits at the bottom of your pool.
I just summarized everything here. Let’s get started with this article!
What is the cause of sand in my pool?
The first step to knowing the best way to get rid of sand in a swimming pool is to understand how the sand got there.
Due to sand fillers
Some swimming pools use sand filters. Sand filters also use sand-filled tanks to ensure pool water quality. It works because water runs through the sand, and large debris particles are trapped in the sand. This allows clean water to pass through the pool and back into the pool through the hose at the bottom of the filter.
In some cases, the sand filter may malfunction. So if the pool is full of sand and you use a sand filter, this could be why. “What’s the reason?” you ask. Well, it mainly comes down to pieces.
Cracked or Broken Standpipe
The standpipe runs vertically through the sand filter’s middle, connecting the sand filter’s bottom to the upper valve. If this happens, this can also crack and get into the bottom of the pool.
Cracked Sides
Laterals are small tubes at the bottom of the sand filter intended to contain the disturbed sand and return the water to the pond. But if one of these tiny tubes breaks, the fine-grained sand will take full advantage of the situation and permeate the pool’s bottom.
How to get Sand out of Pool without Vacuum
Cleaning the pool, whether underground or above ground, is the same. Both require a filter pump many times and will need to be vacuumed if any other debris needs to be removed.
The following method can be used if you haven’t used both tools (or just one) and want to keep them clean. Depending on the type of dirt or sand in the pool, you can use leaf rakes, tennis balls, pool filter systems, brushes, and more.
Choosing the right method for each type of dirt and using it effectively is discussed. If you want the best results for your pool, you may need to use a combination of methods.
Check Out How to Clean pool without vacuum.
Using Tools How To Clean With Tennis balls
Method # 1 Cleaning With Shock Method
The shock method does a great job cleaning and removing algae and debris from your pool. It balances free chlorine levels to kill algae and bacteria in the pool. This requires the following items:
- Calcium hypochlorite pool shock
- A bucket
- Eyewear
- Hand gloves
Follow these steps for cleaning sand:
- Add 1 pound of calcium hypochlorite to the water in the bucket and mix until homogeneous.
- Add it to the pool in areas most affected by algae and bacteria.
- Run the pool for 12 hours (half a day) to mix the impact and water properly. At this stage, the water should be cloudy.
- After 12 hours, add a pond clarifier to remove condensation from the water. You can also run the pool for another day to clean itself.
Method # 2 Cleaning With Leaf Rake
Large debris that sinks to the bottom of the pond or floats around it can be easily removed using a leaf rake. For best results, choose a plastic that won’t damage the bottom or sides of the pool. If dirt is in a corner or other suitable location, remove it with the appropriate tool.
Method # 3 Cleaning With Skimmer Net
Skimmernet is ideal for dirty pools that do not dissolve in water. These include leaves, leaves, wood chips, and more. Such stains must be removed before they break into small pieces that are difficult to remove.
Method # 4 Cleaning With Hand
Unlike a dustpan, your hands don’t return dirt to water, so you may need to remove floor debris manually. The same is valid for floating soils such as leaves and petals.
Any one or a combination of these methods will help solve the problem of pool pollution. For best results, you should combine them. In this way, you can be sure to deal with all kinds of dirt in the water.
When cleaning the pool with most of these methods (except filter pumps), aim to calm the water by closing the inlet and outlet. Thus, when collected on one side of the pool, the water flow will not accidentally spread the dirt on the waves.
Method # 5 Cleaning With Tennis balls
Tennis balls tend to attract greasy stains that float and mix in water. These can be natural oils, lotions, other skincare products, and chemicals such as insect repellents used around swimmers or pools.
To use them, throw the balls into the pool and let them float freely. Over time, they will attract oils and chemicals to themselves. Then remove the balls, gently clean them, dry them in the pool or play tennis. It is not very expensive so you can throw it away.
Method # 6 Cleaning With Brush
If you have the freedom to use the pool brush, you don’t need a vacuum cleaner. Pool brushes are a great tool because they don’t just focus on the bottom. You can also scrub the sides of the pool, so it does not become slimy or algae.
Use a pool brush to remove scale from pool tiles and other deposits. Wipe down all the walls completely and let the water sit for a few hours to allow all the residue to settle.
When the float disappears, use the bristles of a brush to gently sweep away a large pile at the bottom of the pool. From there, use a manual vacuum to remove the pile or manually remove it.
Method # 7 Cleaning With Applying Filter
Filters make cleaning the bottom of pool algae and other debris easy. Sand can be easily removed from the pool using these tools with pumps.
If there is no filter in the pool, do not stress. The bottom of your pool can still clean up debris and dirt.
When cleaning the pool, it is important to identify the type of dirt present. As a result, you can proceed accordingly. You don’t have to use the same method to remove algae, sand, or oil.
Experts have said that pools with a filtration system make it easier to remove algae. Removal of algae from the swimming pool can be done in the following ways:
- Be sure to clean the filter thoroughly to avoid clogging due to debris. Make sure you don’t activate the key.
- Clean the walls and floor of the pool using the correct type of brush.
- Pool water can be removed by opening the filter.
There are different types of pool filtration systems on the market. Consider the type of pool before you buy.
In the end, Make Sure Sand Doesn’t Return.
Now that the discomfort has passed, taking as many steps as possible is essential to prevent the sand from returning.
If the filter seems to cause the sand in the pool, you should open the filter and check for damaged parts.
Ways to Fix Cracked Laterals or a Broken Standpipe
I’ll show you how to fix a broken standpipe or cracked laterals on a pool sand filter.
– Remove the pipe connecting to the multiport valve. To do this, loosen the “ring” around each pipe.
– Remove the multi-port valve at the top of the sand filter. There is usually a collar with one or two screws on the side of the valve near the filter base. Loosen these, and you should be able to lift the valve. Be careful not to loosen the O-ring and spider seal.
The sand filter needs to be emptied of sand. To do this, turn the filter to the side and collect the sand manually. After doing this, it is best to replace the sand with sand.
– Remove the standpipe and side assembly. In the middle of the filter is a tube that runs vertically from the bottom of the filter to the top. This is the foot tube. And a rim at the bottom of the filter is attached to the standpipe.
The sides can be screwed into the standpipe. Or, in some models, it can be folded like an umbrella.
Fold in the side pieces or loosen and remove the screws on each side and pull up on the entire standpipe/side assembly to remove it from the filter.
– Check and replace. You can now inspect and replace the damaged parts of the sand filter. Look for small cracks – this is where the sand goes in and out and straight into the pool.
Replacement side pipes, standpipes, and other necessary parts are sold at pool supply stores or online like Amazon.
– Reinstall the sand filter. Reassembly is the opposite of disassembly. Therefore, replace the standpipe and the side, fill the sand and replace the multiport valve. Then reconnect all the pipes and run the test. Then make sure there are no leaks and sand in the pool.
After repairing the filter, give it the necessary gentle and loving care, backwash it every four weeks and replace the litter every 4-5 years.
Conclusion
Sand belongs to deserts, beaches, or sandboxes. But it doesn’t belong at the bottom of your sandbox.
Therefore, if sand is in the pool, check whether the sand filter is damaged or if there is no external sand, such as a children’s sandbox.
Now, This is the summary of the article. I hope you have enough knowledge on How to get Sand out of pool without Vacuum. However, as I mentioned above, you must ensure you have the right tools before applying the cleaning method.
Please get in touch with your local pool cleaner if you do not want to do this cleaning yourself. Simply put, hygiene is close to religiosity in importance.
Related articles You need to know: How To Keep Pool Cover from Sagging?