Site icon Best Pool Cleaner Reviews

How To Keep Pool Cover from Sagging? Learn SECRET Methods!

How To Keep Pool Cover from Sagging?

If you have a swimming pool in your backyard, you probably take every precaution to keep it clean and well maintained. Covering your pool may not be your priority, and you may not even have thought of it. However, I think you will be surprised when you Learn ‘Ways To Keep A Pool Cover From Sagging’ 

So, want to learn “How To Keep Pool Cover from Sagging”? Yes, it would help if you covered your pool from sagging for several reasons. First, a pool cover saves energy and saves water by reducing the amount of make-up water and evaporation. It also reduces chemical consumption and saves cleaning time as it keeps debris out of the pool.

In this article, I will list how to cover your pool daily. I understand this can be a tedious task; however, I’ll walk you through all the easy ways that go with it. After knowing the benefits of swimming pool covers, your opinion and habits in your home will change. Let’s start!

Ways To Keep Pool Cover From Sagging

Before going into the intensity of the work, it is helpful to know that you will find different pool covers on the market depending on your needs. I choose a leaf cover to keep my pool clean before the onset of winter. Likewise, different ceilings serve different purposes. Check out this best pool cover guide to look at some of the best choices.

However, the factors that cause a pool cover to sag remain the same regardless of the type. There are a few things to watch out for and how you can avoid them:

1- Fix leaks immediately

I advise pool owners to check for leaks weekly. After identifying one, the next step is to fix it.

A leaky pool will cause the water level to drop, resulting in a sagging pool cover. So check for leaks around the pool deck, plumbing fixtures, skimmer housing, and other potential sources of leaks.

2- Leaf and snow buildup

I had a problem with leaf buildup that adversely affected the water resistance of my pool cover. The important thing to note here is that you should never attempt to scrape the leaves with a sharp tool such as a leaf rake, as this can cause further damage.

Depending on the pool size, invest in a leaf blower to get the job done without additional hassle. Alternatively, you can choose a leaf net to place over the existing cover. In this case, you can remove the sheets to clean them and put them back.

Likewise, wait for the ice or snow to melt and never get your hands on a shovel or ice pick. Additionally, you can help with the melting process by sprinkling pool salt on the lid. When no more pieces of ice are in sight, pump out the water that has formed using a pool cover water pump.

Debris left unattended for long periods can become a breeding ground for worms, inviting birds that may peck at the hatch.

3- No Heavy Objects

Although you do your best to remove the buildup or tighten the springs, the lid may already start sagging. In such cases, please do not attempt to secure them with heavy objects such as bricks, as they may slip in the pool and cause damage and injury.

Instead, patiently remove any existing buildup and pull the cap as tight as possible before reattaching it. Apart from that, you can also use water pipes made primarily for attaching swimming pool covers.

When doing so, ensure that there are few to no creases, which could cause the cover to tear in extreme cases.

4- Get the proper tube size

I recommend getting a larger tube size, if available, or a heavy-duty rock pulley system that can handle heavier caps than eight mils. Installing an extra-inch tube can teach your pool cover and prevent sagging. You need a quality pulley system that can handle the type of solar cover you have in your pool.

5- Keep the base ends close and Tighten the locks

Now that you’ve installed an extra-inch pulley system, you need to keep the lower ends close together on both sides of the pool. To make the tubes stronger, you need to place them telescopically. The extra stiffness and cutting distance reduce backlash.

Another method to ensure your pool cover never sags is to walk around after installation and ensure all the springs are securely attached to the correct anchors. If they are all attached to their proper anchors, loosen some rod guard straps and tighten better. Make sure there is no space between the reel and the pool cover.

My Recommendation; If the winter pool cover uses a spring system, check that they are tight enough to prevent the cover from sagging. If the springs protrude from the lid, it means there will be less support, and it could cause rips or tears. When closing your pool for the winter, try not to lower the water level too much. A drop in water means that the weight of the snow can stretch the cover too much. Lowering the level to a few centimeters below the skimmer is recommended. If you get a lot of rain or melted ice and the water level gets too high, you should pump in some. A winter pool cover is designed to protect your pool, but it won’t do the job properly if it’s not in peak shape. Ensuring that the winter cover is in perfect condition can save a lot on repairs to the pool and the cover itself.

What can I use to hold the pool cover down?

The easiest and most effective way to keep your pool covered in winter is to use water bags. Made from heavy-duty vinyl designed to withstand sub-zero temperatures, the water bags provide peace of mind. Once installed, you know your pool cover will be safe all winter long.

How come my pool cover keeps falling in?

Sometimes it cannot be easy to keep pool covers in place. High winds, heavy rain, or even snow can knock them into the pool. One thing you don’t want to do is put anything on the lid to hold it in place. If you do, you also risk dragging it into the pool.

How to fix the swimming pool cover on the terrace?

Most solid covers should be attached to the sides of the pool or deck. They come with a cable that runs through the holes along the edge of the cover. You can also purchase a sturdy pool cover with water bags that keep the cover from moving and lifting in strong winds.

Final verdict

Now you have learned a complete guide on How to keep pool cover from sagging depending on the type, size, and quality of cover you use. You can have a perfectly fitting pool cover that fits correctly but stretches and sags due to poor quality. The pool cover may be weak to support the amount of rainwater the pool receives, especially when the pool water is shallow. Therefore, installing a high-quality pattern using the correct size coil is the best way to prevent the pool cover from sagging. Install properly with locks and anchors and maintain the ideal water level.

Exit mobile version