How To Make a Pool Vacuum Using a Garden Hose?

One of the many tasks part and parcel of being a pool owner is cleaning the pool. You can create a stand-in pool vacuum using a garden hose if your regular pool vacuum is not working or you haven’t yet acquired one. To use a garden hose as a pool vacuum, the outlet end of the hose must be lower than the intake end due to the siphoning effect.

You can create a garden hose pool vacuum by placing the intake end of the hose in the pool and sucking on the exhaust end until the water starts to flow. Water will flow through the pipe using the siphon principle. Clean the pool floor by moving the intake end of the pipe across it.

For cleaning dirt from the bottom of your pool, using a garden hose as a pool vacuum can be a valuable substitute for a standard pool vacuum connected to the pool pump. Compared with commercial pool vacuum cleaners, a garden hose is the best alternative. When a pool’s pump filter malfunctions, this is a less expensive alternative.

Make A Pool Vacuum Using A Garden Hose:

How To Make a Pool Vacuum Using a Garden Hose?

You will need the following items to make a pool vacuum with a garden hose:

Vacuum Bag

The vacuum bag acts as a creator of the suction pressure. Suction prevents debris from returning from the vacuum to the pool. Remember that this is an essential part of your vacuum cleaner.

A Garden Hose

You can use a new or old garden hose for your needs. Ideally, it would help to use a 25-foot twist-free garden hose because the pool has plenty of space. On the other hand, use a small garden hose for the inflatable kiddie pool.

Plastic Funnel

The outer diameter of the garden hose is relatively small. This means that it will take a lot of time to clean the debris from the pool. Therefore, it is necessary to use a plastic funnel with a larger diameter. You can use a 500ml bottle and cut it at a 45-degree angle to get the funnel you want.

Telescopic Pole

The length of the telescopic pool pole varies. Typically, pool owners use the tool to capture floating debris right at the poolside.

Tip: Be careful when using an electrically powered device near a swimming pool to avoid electrocution.

The vacuum bag must be attached to the end of the garden hose after the appropriate garden hose has been connected. You need to make sure the vacuum bag is connected to the straight end of the tube. You can determine this by looking at the end of the garden hose with a valve that connects to the suction bypass.

Then attach the telescopic pole or handle to the garden hose. To insert a garden hose with a telescopic handle, you must remove the handle from the leaf skimmer.

Some handles may have two pins. To remove the skimmer rods, you must push them down. For others, you may need to twist the leaf skimmer to remove the telescoping handle.

Next, find the pool vacuum handle hole on the garden hose and attach the telescopic pole. If you still have trouble connecting the telescoping handle to the tube, try using a knot to tie the two tools together.

That’s it. You are ready with a flexible pool vacuum to clean the pool water in your garden.

What is the best way to clean a pool with a garden hose pool vacuum:

After you have prepared the pool vacuum made with the garden hose, you can easily remove debris from the water with our simple guide:

  1. Use your telescopic handle to lower the garden hose into the water slowly.
  2. The handle should reach the bottom of the pool so that the vacuum may collect all the debris under the water.
  3. Make sure the vacuum reaches every inch of the pool floor gradually and gently. Pay particular attention to areas where debris accumulates.
  4. It is important to repeat the scanning process at least a few times to ensure that all grime and debris have been removed.
  5. Finally, carefully remove the pool vacuum from the water so that no debris can return to the water.

Precaution – Please put the trash in the trash can safely. Then remove the telescopic pole, plastic funnel, and vacuum bag so that the garden hose can resume normal watering operations.

How does a garden hose pool vacuum work?

Take a moment to envision drinking water from a bottle with a straw while watching a garden hose sucking up debris and dirt from the bottom of the pool. When you inhale a straw, the pressure is lower than the atmospheric pressure around you, pushing water into your mouth. Vacuum cleaner paper packs work by creating negative pressure.

With the help of an electric motor attached to the vacuum bag, the fan spins, sucking air into the mouth as it rotates. A long garden hose will keep the electric motor and vacuum bag well away from the pool for your safety. Keep in mind that the suction force produced by the pool vacuum depends on the size of the inlet valve on the garden hose. The smaller the intake valve, the more suction power you get. Before using the pool vacuum, make sure no air bubbles come out of the garden hose.

You may also be looking for: How To Build a Pool Cover from PVC Pipe? 

Ways To Improve A Garden Hose Pool Vacuum

Some improvements can be made to designing a basic garden hose pool vacuum cleaner that overcomes some of its limitations. The changes will mainly improve the convenience of using the vacuum cleaner. The pipe diameter limit will continue to be limited.

Here are some simple changes that you can make to your pool vacuum to make it easier to use.

Put the brush on the pipe.

A small brush with soft bristles can be attached to the end of the hose. You can use it to scrape stubborn stains from the bottom of the pool gently.

Extend your pole

The pool store sells extended poles and telescoping pool cleaning equipment. You can have a pool net with an extension pole if you have a pool.

Attach the hose to the extension pole with the outlet end of the hose protruding slightly from the end of the pole. This change weighs down the end of the hose to help keep hose out of the water and allows you to clean the pool without getting into the pool.

Use pantyhose to filter wastewater.

Putting the old sticky on the outlet end of the hose and pouring the wastewater into the bucket can be clean enough to return to the pool to save on water usage costs.

These changes improve the design and convenience of the hose-end pool vacuum and allow you to remove sand from the bottom of the pool more effectively.

FAQs- Related to Pool Vacuum

Final Outline

One of the best recreational facilities is a swimming pool. A backyard swimming pool could save you the trouble of visiting public pools during the summer. Instead of building permanent, you can buy inflatable kiddie pools for your kids. Pool maintenance requires attention to detail and commitment. You can easily remove acceptable debris settled on the pool’s floor using a garden hose vacuum. Using this method is an affordable and efficient way of cleaning your pool.

Leave a Comment