How To Vacuum A Pool Without A Pump

Pool maintenance is essential, especially if you want to extend the life of the pool. Vacuuming regularly will keep your pool healthy. Pumps push water through pipes, allowing for proper circulation and distribution of chemicals. If you own a swimming pool, you should know that chlorine is added to water as a disinfectant, and when mixed with water, chlorine forms compounds that kill harmful bacteria. ..

Pool pumps are needed for this type of job, but pool pumps may be insufficient. It may not seem like the best option as the pool needs maintenance while waiting for the pump to stop working or repair. You can choose another way to clean your pool. Therefore, pool owners should learn to vacuum the pool without a pump. This article presents some of the best ways to vacuum a swimming pool without a pump.

The equipment you need to vacuum the pool is:

  1. Vacuum plate
  2. Pool hose (must be flexible)
  3. Telescope pool pole
  4. Suction head (requires flexibility)

Easy Steps On How To Vacuum A Pool Without A Pump

There are different steps to follow when vacuuming a swimming pool. They include:


When the suction head is attached to the open side of the telescopic pole, this process allows the vacuum to move the suction head around the bottom of the pool and connect one end of the hose to the top hose using a hose clamp—vacuum cleaner head.


The second step is to place the hose with the suction head on the bottom of the pool, making sure the other end of the particular hose is outside the pool. Then take one end of the hose and place it against the return jet (this needs to be done in the pool, and you need to ensure the pump and filter are working). This process aims to remove the air in the pipe altogether.


Remove the basket. Block the inside of the skimmer and one end of the hose, which is now filled with water, and use your hand as a block against the hose to insert the hose until it touches the suction holes in the skimmer. The bottom of the skimmer. This process sends rising bubbles through the suction head and continues to increase until the head is full, causing the suction to flatten the head and make it very tight to the bottom of the pool.


Attach the vacuum plate to the other end of the pipe (the end opposite the jet), block the opening like a pipe, and place it in the skimmer. This process should be done with great care so as not to lose the seal or the suction.

If this process is done correctly, suction pressure will be generated from the suction head and flow through the hose, filter system, and skimmer.


A swimming pool’s suction process begins at the shallow end of the pool and ends at the deep end. You must ensure that the strokes used in this vacuuming process are long and slow. This changes as you approach the deep edges where dirt starts to collect. Therefore, the strokes are shorter than the previous strokes and must overlap to sweep the edges.


Quick hits destroy debris and cover the water’s surface, resulting in poor visibility and slowing the process as junk takes a long time to settle. This process reduces visibility and requires patience whenever there is a cloud of debris. Therefore, cleaners should give more time to settle down when confused. The instance should turn off the pump to stop the suction force and release the head when the vacuum head is caught in the vacuum.


The last step is to remove the suction head from the telescopic pole and attach a cleaning brush to the pole. This new tool is used to scrape off algae, dirt, and debris that may have adhered to the pool walls.

You can also read here; How to Clean Dolphin Pool Cleaner Filters

Review Chemical Levels

  • Water hardness:

The next step in compensating for our water is to control the hardness of the water. Calcium hardness is due to mineral measurements; in this situation, calcium is available in the water. The ideal range for calcium hardness is 200 to 400 ppm. To increase calcium hardness, it is necessary to use calcium chloride. If you are unlikely to encounter high calcium hardness levels, you should completely exhaust the pool or use it in the middle and finish with soft water.

  • pH:

PH refers to the overall cleanliness of the water. Water should be extracted within the ideal range of 7.4-7.6, using a pH scale between 1.0 and 14.0. If the pH level is less than 7.0, it indicates acidic conditions (low pH); if the pH level is above 7.0, it means basic needs (high pH). When reading, a pH-increasing agent (sodium carbonate) or a pH-decreasing agent (sodium bisulfate) should be included. Proper pH adjustment is vital as irregularities can be harmful to the skin.

  • Adjustment:

Before including the synthetic formulation, it is essential to activate the siphon, so the synthetic material flows through the pool. Likewise, a specific total can be included for every 10,000 gallons of water at a time when it comes to human-made substances. If you need to include more than the most extreme capacity (per 10,000 gallons), then you should have it in the increase. In all cases, the increment interval should be 6 hours. A superb swimming pool is a gadget used to experience large amounts of chlorine in double water to maintain or restore chlorine balance.

  • Chlorine:

Finally, the factor to adjust is chlorine. Chlorine is used as a disinfectant or disinfectant to eliminate microorganisms, organisms, odorous agents, and various pollutants in the swimming pool. There are several different options for chlorine. Available in gas, fluid, granular, or tablet version. To make a good swimming pool, the chlorine should be between 2.0 and 4.0.

Last words

The swimming pool is a great recreational facility that you can have in your home, but it also comes with responsibilities. The swimming pool’s maintenance is increased, and the life span and a healthy swimming pool with good water circulation. Hopefully, In this blog, you will get the answer and find the solution to ” How To Vacuum A Pool Without A Pump.”

Leave a Comment